|
|||
Our unicorn is ready, we will knit her dress.
Crochet Little Unicorn
Notation: KA-ring amigurumi; Pr - increase; Ub - reduction; Bn is the air loop; Sbn - a column without a crochet; Ssn - column with crochet Сс - connecting column; PSn - polustolbik with a crochet; (sb, pr) x N - to repeat knitting N times; s / np - knit for the back half-loops. All parts are knitted in a spiral, without a lifting loop, unless otherwise specified in the description. Legs (the marker is aligned on the heel)
Begin to knit in beige color 1p - 6in, we knit with the 2nd from the hook of the loop: pr, 3sbn, 4cb in 1 in, continue to knit on the other side of the chain 3sbn, pr (14cb) 2p - pr, 4sbn, 3pr, 4sbn, 2pr (20sbn) 3p - sbn, pr, 5sbn, (sb, pr) x3, 4sbn, pr, sb, pr (26 cbn) We leave a long (approximately1, 5 meter) tail for further tying. Change color and knit for z / np 4p - 26sbn For the remaining in the 4th row of the half loop we tie the shoe in the following way: using the needle, draw the tail on the front side and knit clockwise (bn, cc) in 1sb, repeat to the end of the series. We make the ss, fix the thread and hide it. 5-6p - 26sbn 7р - сбн, уб, 4сбн, (сбн, уб) х4, 4сбн, сбн, уб (20сбн) Change the color to the main color and knit it for s / np 8р - 5сбн, 5уб, 5сбн (15сбн) 9р - (3сбн, уб) х3 (12сбн) Next, the marker can not be aligned 10-18р - 12 сбн Stepping back 2 rows down, put the cotter, fill 19р - 6уб Thread and clip. Handles (marker is not aligned) 1p - 6sb in the spacecraft 2р - (пр, сбн) х3 (9 сбн) 3-4 r - 9 cbn 5р - (2 сбн, пр) х3 (12 сбн) 6-18r - 12cb Stepping back 2 rows down, put the cotter, fill 19р - 6уб Thread and clip.
Body (we knit from the bottom up, the marker can not be aligned) 1p - 6sb in the spacecraft 2р - прх6 (12сбн) 3p - (sb, pr) x6 (18cbn) 4p - (2sbn, pr) x6 (24cb) 5p - (3sbn, pr) x6 (30bn) 6p - (4sbn, pr) x6 (36bn) 7-12p - 36sbn We fasten the legs between 7 and 8 side by side, make sure that they are installed symmetrically, the marker is located in the middle of the back. 13р - (4сбн, уб) х 6 (30 сбн) 14-16r - 30sbn 17р - (3сбн, уб) х 6 (24 сбн) 18-20r - 24cb 21p - (2сбн, уб) х 6 (18 сбн) 22-24р - 18 сбн Handles are fastened between 21 and 22 near
Body fill, install a cotter pin. 25 р - (sbn, ub) х6 (12sbn) 26р - 6уб Thread and clip. Head 1p - 6sb in the spacecraft 2р - прх6 (12сбн) 3p - (sb, pr) x6 (18cbn) 4р - сбн, пр, (2сбн, пр) х5, сбн (24сбн) 5p - (3sbn, pr) x6 (30bn) 6p - 2sbn, pr, (4sbn, pr) x5, 2sbn (36sbn) 7p - (5bn, pr) x6 (42bn) 8р - 3сбн, пр, (6сбн, пр) х5, 3сбн (48сбн) 9-16p - 48sbn We fasten the head 17p - 3sbn, уб, (6сбн, уб) х5, 3сбн (42сбн) 18р - (5сбн, уб) х5 (36сбн) 19р - 2сбн, уб (4сбн, уб) х5, 2сбн (30сбн) 20р - (3сбн, уб) х6 (24 сбн) 21r - sb, ub, (2sbn, уб) х5, сбн (18сбн) 22р - (сбн, уб) х6 (12сбн) 23р - убх6 We fill in as we do the adjustments. The head must not be stuffed to the stone state. The hole must be pulled off, the thread secured and cut. Muzzle 1p - 7in, we begin to knit from the second from the hook Bn: pr, 4cb, 4cbn to 1in, continue along the other side of the chain 4bn, pr (16sbn) 2p - 2pr, 4cdn, 4pr, 4sbn, 2pr (24cb) 3-6p - 24th c. Thread and fasten the thread, leaving the tail for sewing. We sew the muzzle to the head, placing it not in the center, but shifting not much to the bottom. Stuffing as you sew. Horn 1p - 4sb in the spacecraft 2p - (cbn, pr) x2 (6cbn) 3p - 6sbn 4p - (2cbn, pr) x2 (8cbn) 5p - 8cb 6p - (3sbn, pr) x2 (10sbn) 7p - 10sbn 8p - (4sbn, pr) x2 (12cb) 9p - 12sbn Thread and fasten the thread, leaving the tail for sewing.
Ears 1p - 6sb in the spacecraft 2р - прх6 (12сбн) 3р - (пр, сбн) х6 (18сбн) 4-7p - 18cb Fold the eye in half and tie both edges of the ss. Cut the thread, leaving the tail for sewing. Tail the thread into the needle, fold the 2 edges of the ear along and stitch it. We can not cut the thread. Spirals Type the chain Bn (I have 46Bp), with the 3rd from the hook Bn we are tying the Ssn into each Vp, reaching the beginning of our chain we do not cut the thread, but again we dial the chain Bn and also we sew the SSP in each Vp. Repeat the actions the right number of times (I need 3 spirals). By connecting the last spiral we connect the upper and lower edges of each spiral with each other. The thread is fixed and cut off, leaving the tail for sewing. Decor Points 1 and 4 are as close as possible to the base of the head Points 2 and 5 are 2 rows higher than the upper edge of the muzzle Points 3 and 6 at the level of the upper edge of the muzzle, having receded 3 sb from it to the left and to the right Points 2-3 and 5-6 are located diagonally. The first part of the ducks: Enter the needle with a long thread in v. 4 and output in volume 2, enter in v. 3 and output in v. 4. We tighten both ponytails, fix the duck, hide the tail of the thread. We introduce the needle in vol. 1 and output it in vol. 5, enter in vol. 6 and output in vol. 1. We pull up both ponytails and fasten the weft. We do not cut the thread, we will make the second part of the jig. Points 2 and 5 are located at the same place as in the first part Points 7 and 8 retreat 2 cms from points 2 and 5 to the left and to the right, respectively. The rest of the tail is entered again in vol. 4 and output in volume 5, we drive in vol. 8 and output in vol. 2, enter in vol. 7 and output in item 4. Thread tighten, fix and hide the tail. Glue the eyes, embroider cilia and eyebrows. If desired, you can embroider a smile on the unicorns and nostrils on the face. I embroider a mulina divided in half (3 thin strings). she embroidered eyelashes as follows: she introduced a needle with a thread at the base of the head, brought her eyes out into the inner corner, inserted her in an outer corner, made a small arrow, then embroidered a few cilia on top and bottom. We find a successful position and sew the ears, fill the horn and sew on the center of the head, sew the spirals. If desired, the bridge of the nose, cheeks and inner part of the ears should be sunk.
Our unicorn is ready, we will knit her dress.
|
|||
|